The most updated and "live" UK directory on the internet! - see here for more details
UK listings

 » Sussex

Outram Research Ltd


Outram Research is an electronic design house focusing on providing power quality analysers from extremely slow to 100 million samples per second to clients across the UK and further afield. Design solutions provided include analogue and digital signal processing, harmonics and power quality monitoring among others.

Outram Research also provides a number of products available for hire where needed. Visit their website for more information.

Map Location FAQ

Have you given it long enough to charge up slightly so it can automatically start its recording?

if you have left the unit on a shelf for a long period of time without charging it, it might take a few minutes to come back to life again. once the unit is plugged in and the battery has reached a reasonable level of charge, the lights on the front of the unit will start flashing again. you might have to wait a minute or two for this to happen. once they do, check the green lights are flashing appropriately as your recording should then start up automatically.

Can the pm3000 interface to my network?

Yes it can. we can provide an ethernet to serial converter to enable your pm3000 to connect to your network. we’ve had a lot of success with moxa de311, just ask us for one.

Is the frequency measurement in the pm7000 derived from the v or i signal?

The pm7000 can track using any of v1, v2 or v3. v4 or the current channels are never used. the analyser will use v1 unless v2 or v3 are more than twice as big. also if the selected channel has less than (about) 4 volts rms then no frequency tracking is done, the pm7000 will keep running at the last known frequency. this answer applies only to the pm7000, there are minor differences for the other products.

How long does the pm7000 stay in ‘discovery mode’ for bluetooth operations?

The pm7000 stays in ‘discovery mode’ for bluetooth for 1hr. it is stimulated and woken up by lifting and closing the lid on the unit. the bluetooth led on the top panel will flash twice every 4 seconds to show that the bluetooth is awake, then once connected that light will remain on. if the logger is on mains power or charger power the bluetooth will stay on all the time.

My functions panel has disappeared in the new version of pronto. can i get it back?

Any version of pronto for windows starting with 6. will have a screen specific functions panel which appears on the right hand side of the screen. if for any reason this has disappeared you can switch it on again by clicking on ‘view’ in the tool bar at the top of the page and selecting ‘functions panel’. this will bring it back into view.

View Full FAQ >>
telephone Telephone
+441243573050  UK phone number
UK (Bosham, West Sussex) based business - with over 30 years' experience - providing power quality analyser products. Website includes details of products and services provided, accreditations gained, testimonials, FAQs, associations, full contact details. Company website has been online since 2005 according to reviewer
signals of trust found Signals of trust found on website
  • Testimonials found
  • Full company contact address and
    phone number found
  • Accreditations found
  • Associations found
  • Company website has been online since 2005 according to [via manual review]
  • Over 30 years' experience
  • SSL Website secured by SSL certificate
Review of
Information on how we determine signs of trust

blog   Latest blog entry
Fault Level Management a key contributor to SP Energy Networks RIIO-ED2 Business Plan towards a Net Zero Electricity Network
published on 5 July 2021
terms / privacy policy Key pages found
spider  Site last visited by us on...
5 December 2021
spider  Average page load time
1.03 seconds
31st percentile
campany reg/vat captures
Snapshots of may include domain name holding pages
2018    2014    2013    2011    2010    2010    2008    2007    2007    2006    2004 website (c)2009 - 2021